This lined flat pouch features a 20 cm zipper and is perfect for keeping stationery, cosmetics, craft supplies, and other small essentials neatly organized. An inner zippered divider separates the pouch into two compartments, making it easy to organize and access your belongings.
Instructions Sample
Design & Work: Usanko Channel
Materials:
Centimeters:
- Fabric (Outer Fabric, Handle): 50cm x 30cm
- Fabric (Lining Fabric): 25cm x 40cm
- Fusible Interfacing: 50cm x 30cm
- Zipper: 20cm x 1 piece
- Plasnap Snap Button: 1.3cm diameter x 2 pairs
Inches:
- Fabric (Outer Fabric, Handle): 19.7" x 11.8"
- Fabric (Lining Fabric): 9.8" x 15.7"
- Fusible Interfacing: 19.7" x 11.8"
- Zipper: 7.9" x 1 piece
- Plasnap Snap Button: 0.5" diameter x 2 pairs
Finished Size:
Centimeters:
W21 x L10cm / W8.3" x L3.9"
Fabric shown for this sample:
100% Cotton Oxford
*Same fabric is not available at Kokka Fabrics
Instructions
1. Make the handle. With the front sides facing outside, fold it in quarters and sew the two ends of the long side.
2. Align the patterns on the two pieces of outer fabric. Since the patterns have a specific direction, perform this step first.
3. With the front sides facing each other, place the two outer fabric pieces together and sew along the long edge.
4. Sew the zipper onto the long edge of the outer fabric. Place the zipper with the teeth facing down so that the end of the zipper is 5 mm from the edge of the fabric, and sew at 5 mm from the end of the zipper.
5. Turn the lining fabric inside out, and align the center of the fabric with the center of the zipper.
6. Sew along both sides.
7. Trim the seam allowances and apply zigzag stitches on the edges.
8. Use a stiletto to bring out the corners.
Recommended Fabric
The PDF download is below!
